800-867-8426 ? info@opticomm.com ? www.opticomm.com ? contact opticomm for custom requirements. * chromatic dispersion and additional losses should be taken into account features ? ultra-high resolution (1840 x 1634) ? multimode operation over 4 fibers ? 200 mhz video bandwidth ? vga/svga with keyboard/mouse ps/2, one rs-232 aux/data and two audio ports. ? true dc restoration with agc ? flat frequency response ? complies with rs-170, rs-170a & rs-343 eia standards ? no emi or rfi and no ground loops ? stand alone or mounting brackets ? ideal for cad/cam workstation extensions optical wavelength fiber output receiver loss conn 865 1310 1550 type mode suffix type power sensitivity budget range* type ? led mm l0 50 /125 -13 dbm -20 dbm 7 db 1 km st ? 62.5/125 -10 dbm -20 dbm 10 db 2 km st ? laser sm l2 09/125 -8 dbm -16 dbm 8 db 8 km fc 200 mhz vga/rgb video with keyboard/mouse, audio, and auxilliary data for ultra high resolution remote displays the RGB-3006 is a six-fiber amplitude modulated (am), led or laser-based vga-rgb/video with keyboard/mouse ps/2, one rs-232 aux/data and two audio ports. a 15 pin vga interface port provides h/v sync or composite external sync or sync on green or all three channels. it is ideal for the extension of any high resolution video signal such as a cad/cam graphics workstation. units come with a built-in automatic gain control (agc) to maintain constant video output for each color. system design status indicators for: power on, vga h/v sync present. all units come as a stand alone version. units can be rack-mountable with optionally provided brackets for a flat surface such as a desk top in a cabinet, or mounted in a 19? rack. rgb-3003 unit comes with internal 87- 264 v ac power supply that operates with a selectable power supply. the regulated switching power supply has short circuit protection, and an input operating voltage of 110/220 v ac . RGB-3006 6-fiber vga 200 mhz hi-resolution
emissions: fcc part 15, ices-003, as/nzs, 3548, en55022 immunity: envs0204, en61000-4-2,3,4,5,6,11 safety: ul1950, can/csa 22.2, no.950-95 made in the usa rgb/vga/dvi video video in/out impedance 75 ? video in/out level 1 volt peak to peak, 0.7 volts without sync video bandwidth 10 hz to 200 mhz @ -3db grayscale linearity distortion < 2.0 % typical pixel intensity distortion < 2.0 typical linearity 1.1 % typical tilt 0.5 % typical maximun horizontal frequency 128 khz maximum refresh rate 120 khz signal to noise ratio >55 db using rs-250c standards @ 1 km connector type bnc audio audio in/out impedance 600 ? balanced or unbalanced audio in/out level -6 to +6 dbm frequency response 10 hz to 20 khz signal to noise ratio > 60 db total harmonic distortion < 1.0 %, 1 khz at maximum modulation connector type phoenix 5 pin unbalanced 1 (l/r) to rca phoenix 5 pin balanced to 2 mono (l/r) to xlr data data rate dc to 19.2 kbps bit error rate 10 -9 data formats available keyboard/mouse ps2 6pin din type connector type auxilliary rs-232 port db9 pin general dimensions & weight 13.75? l x 8.50? w x 1.65? h 39 oz material aluminum casing operating temperature -20 c to +70 c storage temperature -30 c to +85 c humidity 0 to 95% non-condensing operating voltage 110/220 v ac selectable vibration up to 5 g's shock up to 12 g's diagnostics status monitoring led indication sample configuration optiva ? configurable communication platform network management sdi & hd-sdi composite video, audio & data rgb/vga/dvi audio/fsk/intercom data (ethernet/serial/usb) catv/rf & l-band optical switching, routing & redundancy passive multiplexing solutions enclosures, racks & frames power supplies & accessories
|
